Follow Us on Google News
Follow Us on Google Discover
NATIONAL BOARD FOR TECHNOLOGY INCUBATION
FEDERAL MINISTRY OF INNOVATION, SCIENCE AND TECHNOLOGY
BLOCK C 4th FLOOR FEDERAL SECRETARIAT PHASE II P.M.B 305, ABUJA
EMAIL: [email protected]
CONTACTS: 08034002412, 08140823414
INVITATION TO TENDER
(TECHNICAL AND FINANCIAL)
1. INTRODUCTION
The National Board for Technology Incubation (NBTI) is an agency of the Federal Ministry of Innovation, Science and Technology that provides infrastructural facilities for the commercialization of research and development results, thereby enabling a comprehensive ecosystem vital to the industrial development of the nation.
NBTI hereby invites interested, reputable and competent contractors/suppliers with relevant experience and a good track record to submit bids for the under-listed 2026 capital projects.
2. PROJECT LOCATION
National Board for Technology Incubation Headquarters, Block C, 4th Floor, Federal Secretariat, Phase II, Abuja. Contacts: +234 803 400 2412, +234 814 082 3414.
SCOPE
A. WORKS
| LOT | NAME OF PROJECT |
| A1.1 | Construction and Furnishing of NBTI Conference Centre, Abuja (Structural & Infrastructure Works) |
| A1.2 | Construction and Furnishing of NBTI Conference Centre, Abuja (Finishes, MEP, AV Systems, External Works & Furnishing) |
| A2.1 | Construction and Furnishing of Innovation Museum/Arena, Jahi, Abuja (Structural & Infrastructure Works) |
| A2.2 | Construction and Furnishing of Innovation Museum/Arena, Jahi, Abuja (Finishes, MEP, AV Systems, External Works & Furnishing) |
| A2.3 | Construction and furnishing of NBTI HQ (Fire Detection, Suppression and Prevention System) |
| A3.1 | Establishment of AI, Robotics, 3D Printing, Additive Manufacturing and FABLAB at NBTI HQ (Multi Lot) |
| A3.2 | Establishment of AI, Robotics, 3D Printing, Additive Manufacturing and FABLAB at Oyo (Multi Lot) |
| A3.3 | Establishment of AI, Robotics, 3D Printing, Additive Manufacturing and FABLAB at FCT (Multi Lot) |
| A3.4 | Establishment of AI, Robotics, 3D Printing, Additive Manufacturing and FABLAB at Lagos (Multi Lot) |
| A3.5 | Establishment of AI, Robotics, 3D Printing, Additive Manufacturing and FABLAB at Ojongbodu (Multi Lot) |
| A3.6 | Establishment of AI, Robotics, 3D Printing, Additive Manufacturing and FABLAB at Akwa Ibom (Multi Lot) |
| A3.7 | Establishment of AI, Robotics, 3D Printing, Additive Manufacturing and FABLAB at Enugu (Multi Lot) |
| A4.1 | Establishment of Innovation Hub and Park FCT Abuja (Land Acquisition, Preparation and Fencing) |
| A4.2 | Establishment of Innovation Hub and Park FCT Abuja (Construction of Main Structures – Phase 1) |
| A4.3 | Establishment of Innovation Hub and Park FCT Abuja (Construction of Ancillary and Support Structures – Phase 2) |
| A4.4 | Establishment of Innovation Hub and Park FCT Abuja (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.5 | Establishment of Innovation Hub and Park FCT Abuja (Commencement and Staff Training) |
| A4.6 | Establishment of Innovation Hub and Park Oyo Town (Land Acquisition, Preparation and Fencing) |
| A4.7 | Establishment of Innovation Hub and Park Oyo Town (Construction of Main Structures – Phase 1) |
| A4.8 | Establishment of Innovation Hub and Park Oyo Town (Construction of Ancillary and Support Structures – Phase 2) |
| A4.9 | Establishment of Innovation Hub and Park Oyo Town (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.10 | Establishment of Innovation Hub and Park Oyo Town (Commencement and Staff Training) |
| A4.11 | Establishment of Innovation Hub and Park Lagos (Land Acquisition, Preparation and Fencing) |
| A4.12 | Establishment of Innovation Hub and Park Lagos (Construction of Main Structures – Phase 1) |
| A4.13 | Establishment of Innovation Hub and Park Lagos (Construction of Ancillary and Support Structures – Phase 2) |
| A4.14 | Establishment of Innovation Hub and Park Lagos (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.15 | Establishment of Innovation Hub and Park Lagos (Commencement and Staff Training) |
| A4.16 | Establishment of Innovation Hub and Park Akwa Ibom (Land Acquisition, Preparation and Fencing) |
| A4.17 | Establishment of Innovation Hub and Park Akwa Ibom (Construction of Main Structures – Phase 1) |
| A4.18 | Establishment of Innovation Hub and Park Akwa Ibom (Construction of Ancillary and Support Structures – Phase 2) |
| A4.19 | Establishment of Innovation Hub and Park Akwa Ibom (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.20 | Establishment of Innovation Hub and Park Akwa Ibom (Commencement and Staff Training) |
| A4.21 | Establishment of Innovation Hub and Park Enugu State (Land Acquisition, Preparation and Fencing) |
| A4.22 | Establishment of Innovation Hub and Park Enugu State (Construction of Main Structures – Phase 1) |
| A4.23 | Establishment of Innovation Hub and Park Enugu State (Construction of Ancillary and Support Structures – Phase 2) |
| A4.24 | Establishment Innovation Hub and Park Enugu State (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.25 | Establishment of Innovation Hub and Park Enugu State (Commencement and Staff Training) |
| A4.26 | Establishment of Innovation Hub and Park Ojogbodu Iseyin Road (Land Acquisition, Preparation and Fencing) |
| A4.27 | Establishment of Innovation Hub and Park Ojogbodu Iseyin Road (Construction of Main Structures – Phase 1) |
| A4.28 | Establishment of Innovation Hub and Park Ojogbodu Iseyin Road (Construction of Ancillary and Support Structures – Phase 2) |
| A4.29 | Establishment Innovation Hub and Park Ojogbodu Iseyin Road (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.30 | Establishment of Innovation Hub and Park Ojogbodu Iseyin Road (Commencement and Staff Training) |
| A4.31 | Establishment of Technology Incubation Centre, Ekinrin Adde Kogi State (Land Acquisition, Preparation and Fencing) |
| A4.32 | Establishment of Technology Incubation Centre, Ekinrin Adde Kogi State (Construction of Main Structures – Phase 1) |
| A4.33 | Establishment of Technology Incubation Centre, Ekinrin Adde Kogi State (Construction of Ancillary and Support Structures – Phase 2) |
| A4.34 | Establishment of Technology Incubation Centre, Ekinrin Adde Kogi State (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.35 | Establishment of Technology Incubation Centre, Ekinrin Adde Kogi State (Commencement and Staff Training) |
| A4.36 | Establishment of Technology Incubation Centre, Akwanga Nasarawa (Land Acquisition, Preparation and Fencing) |
| A4.37 | Establishment of Technology Incubation Centre, Akwanga Nasarawa (Construction of Main Structures – Phase 1) |
| A4.38 | Establishment of Technology Incubation Centre, Akwanga Nasarawa (Construction of Ancillary and Support Structures – Phase 2) |
| A4.39 | Establishment of Technology Incubation Centre, Akwanga Nasarawa (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.40 | Establishment of Technology Incubation Centre, Akwanga Nasarawa (Commencement and Staff Training) |
| A4.41 | Establishment of Technology Incubation Centre, Yobe State (Land Acquisition, Preparation and Fencing) |
| A4.42 | Establishment of Technology Incubation Centre, Yobe State (Construction of Main Structures – Phase 1) |
| A4.43 | Establishment of Technology Incubation Centre, Yobe State (Construction of Ancillary and Support Structures – Phase 2) |
| A4.44 | Establishment of Technology Incubation Centre, Yobe State (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.45 | Establishment of Technology Incubation Centre, Yobe State (Commencement and Staff Training) |
| A4.46 | Establishment of Technology Incubation Centre, Adamawa State (Land Acquisition, Preparation and Fencing) |
| A4.47 | Establishment of Technology Incubation Centre, Adamawa State (Construction of Main Structures – Phase 1) |
| A4.48 | Establishment of Technology Incubation Centre, Adamawa State (Construction of Ancillary and Support Structures – Phase 2) |
| A4.49 | Establishment of Technology Incubation Centre, Adamawa State (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.50 | Establishment of Technology Incubation Centre, Adamawa State (Commencement and Staff Training) |
| A4.51 | Establishment of Technology Incubation Centre, Emure-Ile, Owo (Land Acquisition, Preparation and Fencing) |
| A4.52 | Establishment of Technology Incubation Centre, Emure-Ile Owo (Construction of Main Structures – Phase 1) |
| A4.53 | Establishment of Technology Incubation Centre, Emure-Ile, Owo (Construction of Ancillary and Support Structures – Phase 2) |
| A4.54 | Establishment of Technology Incubation Centre, Emure-Ile, Owo (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.55 | Establishment of Technology Incubation Centre, Emure-Ile, Owo (Commencement and Staff Training) |
| A4.56 | Establishment of Technology Incubation Centre, Lapai, Niger State (Land Acquisition, Preparation and Fencing) |
| A4.57 | Establishment of Technology Incubation Centre, Lapai, Niger State (Construction of Main Structures – Phase 1) |
| A4.58 | Establishment of Technology Incubation Centre, Lapai, Niger State (Construction of Ancillary and Support Structures – Phase 2) |
| A4.59 | Establishment of Technology Incubation Centre, Lapai, Niger State (Equipping, Furnishing, Power & Connectivity Systems) |
| A4.60 | Establishment of Technology Incubation Centre, Lapai, Niger State (Commencement and Staff Training) |
B. GOODS
| LOT | NAME OF PROJECT |
| B1 | Provision of Project and Operational Vehicles |
| B2.1 | Equipping of Standard Quality Laboratories in selected TICs Across the 6 Geo-Political Zones Including Installation and Training in Zone A (Multi Lot) |
| B2.2 | Equipping of Standard Quality Laboratories in selected TICs Across the 6 Geo-Political Zones Including Installation and Training in Zone B (Multi Lot) |
| B2.3 | Equipping of Standard Quality Laboratories in selected TICs Across the 6 Geo-Political Zones Including Installation and Training in Zone C (Multi Lot) |
| B2.4 | Equipping of Standard Quality Laboratories in selected TICs Across the 6 Geo-Political Zones Including Installation and Training in Zone D (Multi Lot) |
| B2.5 | Equipping of Standard Quality Laboratories in selected TICs Across the 6 Geo-Political Zones Including Installation and Training in Zone E (Multi Lot) |
| B2.6 | Equipping of Standard Quality Laboratories in selected TICs Across the 6 Geo-Political Zones Including Installation and Training in Zone F (Multi Lot) |
| B3 | Provision and Installation of Laptops and Printers at NBTI Headquarters, Jahi, Abuja |
| B4 | Provision and Installation of ICT Infrastructure at NBTI Headquarters, Jahi, Abuja |
| B5 | Provision and Installation of Enterprise Resources Planning at NBTI Headquarters, Jahi, Abuja |
| B6 | Provision and Installation of ICT Infrastructure and equipment in Selected TIC in North Central Zone |
| B7 | Provision and Installation of ICT Infrastructure and equipment in Selected TIC in North East Zone |
| B8 | Provision and Installation of ICT Infrastructure and equipment in Selected TIC in North West Zone |
| B9 | Provision and Installation of ICT Infrastructure and equipment in Selected TIC in South East Zone |
| B10 | Provision and Installation of ICT Infrastructure and equipment in Selected TIC in South West Zone |
| B11 | Provision and Installation of ICT Infrastructure and equipment in Selected TIC in South South Zone |
C. SERVICES
| LOT | NAME OF PROJECT |
| C1.1 | Provision of Value Chain Support for Technology Sourcing and Commercialisation Efforts with Linkages to Industries in Nigeria (Multi Lot) |
| C1.2 | Provision of Value Chain Support for Technology Sourcing and Commercialisation Efforts with Linkages to Industries in Nigeria (Multi Lot) |
| C2.1 | Provision of Value Chain Support for Monitoring and Evaluation of Research and Development Results for Commercialisation (Multi Lot) |
| C2.2 | Provision of Value Chain Support for Monitoring and Evaluation of Research and Development Results for Commercialisation (Multi Lot) |
- ELIGIBILITY REQUIREMENTS
- All documents submitted must be transmitted with a covering/forwarding letter on the company’s/firm’s letterhead bearing, among other things, the Registration Number (RC) issued by the Corporate Affairs Commission (CAC), contact address, telephone number (preferably GSM) and e-mail address. The letterhead must bear the names and nationalities of the directors of the company and be duly signed by an authorized officer of the firm.
- Evidence of Certificate of Incorporation issued by the Corporate Affairs Commission (CAC), including the Memorandum and Articles of Association and Form CAC 1.1 (or CAC 2 and CAC 7).
- Evidence of the company’s Tax Clearance Certificate for the last three (3) years — 2023, 2024 and 2025 — valid until 31st December, 2026.
- Evidence of a current Pension Compliance Certificate valid until 31st December, 2026.
- Evidence of a current Industrial Training Fund (ITF) Compliance Certificate valid until 31st December, 2026.
- Evidence of a current Nigeria Social Insurance Trust Fund (NSITF) Compliance Certificate valid until 31st December, 2026.
- Evidence of registration on the National Database of Federal Contractors, Consultants and Service Providers by submission of a verifiable, valid Interim Registration Report (IRR) issued by the Bureau of Public Procurement (BPP).
- A sworn affidavit disclosing whether or not any officer of the relevant committees of NBTI or of the Bureau of Public Procurement is a former or present director, shareholder or has any pecuniary interest in the bidder, and confirming that all information presented in the bid is true and correct in all particulars.
- The company’s audited accounts for the last three (3) years — 2023, 2024 and 2025.
- Evidence of financial capability to execute the project from a reputable commercial bank, indicating willingness to provide a credit facility for the execution of the project when needed.
- Company profile, including the curriculum vitae of key staff to be deployed for the project and copies of their academic and professional qualifications.
- Verifiable documentary evidence of at least three (3) similar jobs executed in the last five (5) years, including letters of award, valuation certificates and, where applicable, job completion certificates and photographs.
- For the supply of equipment: a letter of authorization from the Original Equipment Manufacturer (OEM) is required.
- For ICT jobs: evidence of current License/Accreditation with the Computer Professionals Registration Council of Nigeria (CPN) and the National Information Technology Development Agency (NITDA).
All documents submitted must be paginated and arranged with a table of contents following the order of the eligibility criteria above.
- COLLECTION OF TENDER DOCUMENTS
Tender documents are obtainable from the Procurement Department, NBTI Headquarters, Block C, 4th Floor, Federal Secretariat, Phase II, Abuja, upon payment of a non-refundable tender fee of N10,000.00 (Ten Thousand Naira) per lot into the National Board for Technology Incubation Remita account at any reputable commercial bank in Nigeria.
- SUBMISSION OF TENDER DOCUMENTS
Each bid must be submitted in two separate sealed envelopes — one clearly marked “Technical Bid” and the other “Financial Bid” — both enclosed in a single outer sealed envelope. The relevant lot must be marked at the top left-hand corner of the outer envelope, and the reverse of the envelope must bear the name and address of the bidder.
The bid must be addressed to the Director-General/CEO, NBTI Headquarters, Block C, 4th Floor, Federal Secretariat, Phase II, Abuja, and dropped in the designated tender box at the Procurement Department at the same address, not later than 12:00 noon on 13th July, 2026.
- BID OPENING
Only the technical bids will be opened immediately after the submission deadline, at 12:00 noon on 13th July, 2026, at the National Board for Technology Incubation Headquarters, Block C, 4th Floor, Federal Secretariat, Phase II, Abuja. Bidders and/or their representatives, as well as members of the public and relevant professional bodies, are invited to witness the opening.
- IMPORTANT NOTICE
- This advertisement shall not be construed as a commitment on the part of the National Board for Technology Incubation (NBTI).
- Applicants are entirely liable for the veracity of the documents they submit.
- No bidder is entitled to make any claim and/or seek any indemnity from NBTI by virtue of having responded to this advertisement.
- Bid documents may also be collected in soft copy, and bidders may submit through post (courier services).
- Only bidders pre-qualified at the technical evaluation stage will be invited at a later date for the financial bid opening; the financial bids of unsuccessful bidders will be returned unopened.
- NBTI is not bound to pre-qualify any bidder and reserves the right to annul the procurement process at any time without incurring any liability, in accordance with Section 28 of the Public Procurement Act, 2007.
Signed,
Director-General/CEO
National Board for Technology Incubation
